Top 5 tools to Remote Access in Linux

In this tutorial, I will display you tools that permit you to get right of entry to faraway Desktop on machines strolling CentOS/RHEL. All those apps work in client-server mode. So you want to run a server-aspect app for your faraway machine and after that, you may be capin a position to connect to it from everywhere in the world. Of course on this reference manual, I will inform you a way to configure this securely, so most effective you could get right of entry to your server. Before we begin, you’ll want SSH access on your server and permissions to put in the software. You will want to login as the root user or user with the sudo privileges. All instructions will work on each CentOS server 5/6/7/8. Before we start, you want to put in desktop surroundings on your server.

1) VNC

x11vnc – simplest of these three methods to get remote access. VNC stands for Virtual Network Computing) is a very useful network graphics protocol.

You need to enable EPEL (Extra Packages for Enterprise Linux) repository. Run

# yum -y install epel-release

Now we can install x11vnc. This command will install server and solve all dependencies:

# yum -y install x11vnc

Then we will protect server with password:

# x11vnc -storepasswd

Enter VNC password:

Verify password:

Write password to /root/.vnc/passwd? [y]/n y

Password written to: /root/.vnc/passwd

!Do not use simple passwords!

We are now ready to start server:

# x11vnc --reopen --forever -rfbauth ~/.vncpasswd &

You can check if servers started:

# netstat -an | grep 5900

tcp 0 0* LISTEN

tcp6 0 0 :::5900 :::* LISTEN

If it is ok, simply try to connect to it using vncviewer.

# yum -y install vnc
# vncviewer YOUR_SERVER_IP

That’s all! Now you have access to your desktop. After reboot just ssh again and do it again.

x11vnc --reopen --forever -rfbauth ~/.vnc/passwd &

2) TigerVNC server

TigerVNC – is a high-performance, platform-neutral implementation of VNC

# yum install -y tigervnc-server

Let’s copy example config and edit it:

# cp /lib/systemd/system/vncserver@.service /etc/systemd/system/vncserver@:1.service
# vi /etc/systemd/system/vncserver@:1.service

Example of config:

Description=Remote desktop service (VNC)


# Clean any existing files in /tmp/.X11-unix environment
ExecStartPre=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'
ExecStart=/usr/sbin/runuser -l USERNAME -c "/usr/bin/vncserver %i"
ExecStop=/usr/sbin/runuser USERNAME -c '/usr/bin/vncserver -kill %i'


NOTE: You must change the USERNAME in the above config if you’ll use the same VNC setup. This is the configuration we used for this tutorial.

Now we must run vncpasswd command to setup our access password, and/or view-only password (a password that allows the user to only view the remote screen):

# vncpasswd 
Would you like to enter a view-only password (y/n)? n
A view-only password is not used

Now enable autostart service and restart it:

$ systemctl enable vncserver@:1.service
$ systemctl restart vncserver@:1.service

You can check the vnc service status by typing:

$ systemctl status vncserver@:1.service

If everything went ok, you should have similar terminal output to this:

$ systemctl status vncserver@:1.service
● vncserver@:1.service - Remote desktop service (VNC)
   Loaded: loaded (/etc/systemd/system/vncserver@:1.service; enabled; vendor preset: disabled)
   Active: active (exited) since Wed 2020-09-30 22:04:47 CEST; 7s ago
  Process: 3766 ExecStart=/usr/sbin/runuser -l slax -c /usr/bin/vncserver %i (code=exited, status=0/SUCCESS)
  Process: 3761 ExecStartPre=/bin/sh -c /usr/bin/vncserver -kill %i > /dev/null 2>&1 || : (code=exited, status=0/SUCCESS)
 Main PID: 3766 (code=exited, status=0/SUCCESS)

Sep 30 22:04:44 localhost.localdomain systemd[1]: Starting Remote desktop service (VNC)...
Sep 30 22:04:47 localhost.localdomain systemd[1]: Started Remote desktop service (VNC).

And finally connect to it:

# vncviewer YOUR_SERVER_IP


XRDP is an Open Source Remote desktop Protocol server. In order to use XRDP you need to have VNC service already installed. So you should follow the first or second option from this tutorial prior to XRDP installation.

First of all we need to install EPEL repository and xrdp server:

# yum -y install epel-release
# yum -y install xrdp

Now let’s start service:

# systemctl start xrdp.service 

Check if its running, and add it to autostart.

# netstat -an | grep 3389 
tcp 0 0* LISTEN
# systemctl enable xrdp.service

Thats all. Now you can connect to your server from any Windows machine.

4) Teamviewer

Teamviewer does not exist in standard repos, so we need to install wget and download TeamViewer rpm package

# yum -y install wget
# wget

Install it using this command:

# yum install teamviewer.x86_64.rpm

And set your password:

# teamviewer passwd YOUR_PASSWORD
# systemctl start teamviewerd.service

Now you only need to get your id to connect:

# teamviewer –info
TeamViewer ID: 9XXXXXXX7

Try to connect to it using this id and password you set before:

5) FreeNX

FreeNX is a Remote Access solution based on enterprise-class open source technologies by NoMachine. If you want exactly this tool to get remote access, you may consider upgrading to cloud version.

First of all we need to add e EPEL + nux-dextop repositories, for Centos 6:

# rpm -Uvh
# rpm -Uvh

For Centos 7

# rpm -Uvh
# rpm -Uvh

Install server and agent:

# yum install freenx-server nxagent 

Enable passdb authentication:

# echo 'ENABLE_PASSDB_AUTHENTICATION="1"' >> /etc/nxserver/node.conf

Now we need to create user for remote access and assign password for him:

# /usr/libexec/nx/nxserver --adduser bob 
NX> 100 NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: not detected)
NX> 1000 NXNODE - Version 3.2.0-74-SVN OS (GPL, using backend: not detected)
NX> 716 Public key added to: /home/bob/.ssh/authorized_keys2
NX> 1001 Bye.
NX> 999 Bye

#/usr/libexec/nx/nxserver --passwd bob 
NX> 100 NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: not detected)
New password:
Password changed.
NX> 999 Bye

Now we will install epel-repos and opennx client on your machine:

# yum install opennx

After beginning opennx wizard you’ll be requested approximately the consultation name, server address, and port. Most essential component is to installation your key. You’ll want to replicate the important thing from server’s /etc/nxserver/client.id_dsa.key and paste it into the overall tab of your client session properties. Please share your remarks in this educational and allow us to recognise in case you are privy to some other tools.


rdp linux, xrdp ubuntu, linux remote desktop client, remote access in linux, linux rdp client, gnome remote desktop, linux rdp server